Description

Porta-Wand and Porta-Vac II

Portable self-contained continuous vacuum systems
Uses no hoses, replaces tweezers and hose-style wands
High-performance pumps, lifts over 500 grams
Handles up to 12 inch wafers, disk media or flat, hard surface items
Flashing LED indicates low battery
9.6 volt NiMH rechargeable battery system (optional on Porta-Vac ll)
Includes one ESD-safe molded wafer tip, additional tips available
Tested to Class 1 cleanroom levels, customer replaceable 0.2 micron filter
Vacuum up to 22 inches of mercury at sea level
Weighs only 6 ounces with battery
Exhaust exits from rear, away from wafer
Universal 110-220V charger (optional for Porta-Vac II)

Porta-Wand

Picks up 4, 6, 8, or 12″ wafers (100, 150, 200, 300mm), solar cells, disk media, or flat, hard surface items.

The Porta-Wand kit comes with a fixed internal 9.6V NiMH rechargeable battery, in-stand charger and one ESD safe, wafer tip.
Lifts over 500 grams.

A PUSH-BUTTON provides easy on/off control and a “battery-low” indicator flashes when recharging is required.
The internal air filter is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Rear exhaust of the pump air is standard.
Optional wall mounting bracket is available.

Battery Facts:
Battery Type: 9.6 Volt NiMH, Fixed, Rechargeable
Battery Charge Time: 120 minutes for a full charge
Continuous Run Time: 2 to 3 hours
Number of Complete Recharges: Up to 1000
Battery Replacment: Factory replaceable

Vacuum:
Minimum of 15 to 20″ of mercury depending on elevation and atmospheric pressure.
Dimensions (Length x Height x Width):
Wand: 178mm x 30mm x 21mm
Stand: 114mm x 51mm x 98mm

Weight:
Porta-Wand: 154 grams
Charger Stand: 298 grams
Transformer: 454 grams

Operating Temperature Range:
10 C to 45 C

Recharger Power Requirements:
Approved power supplies include supplied In-Stand Charger; Universal 110-220V.
Wall plug-in power supply 24 VDC @ 500ma.
Barrel jack size 5.5mm OD x 2.1mm ID.
Center pin positive.