Porta-Wand and Porta-Vac II

• Portable self-contained continuous vacuum systems
• Uses no hoses, replaces tweezers and hose-style wands
• High-performance pumps, lifts over 500 grams
• Handles up to 12 inch wafers, disk media or flat, hard surface items
• Flashing LED indicates low battery
• 9.6 volt NiMH rechargeable battery system (optional on Porta-Vac ll)
• Includes one ESD-safe molded wafer tip, additional tips available
• Tested to Class 1 cleanroom levels, customer replaceable 0.2 micron filter
• Vacuum up to 22 inches of mercury at sea level
• Weighs only 6 ounces with battery
• Exhaust exits from rear, away from wafer
• Universal 110-220V charger (optional for Porta-Vac II)

Porta-Wand

Picks up 4, 6, 8, or 12″ wafers (100, 150, 200, 300mm), solar cells, disk media, or flat, hard surface items.

The Porta-Wand kit comes with a fixed internal 9.6V NiMH rechargeable battery, in-stand charger and one ESD safe, wafer tip.
Lifts over 500 grams.

A PUSH-BUTTON provides easy on/off control and a “battery-low” indicator flashes when recharging is required.
The internal air filter is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Rear exhaust of the pump air is standard.
Optional wall mounting bracket is available.

Battery Facts:
Battery Type: 9.6 Volt NiMH, Fixed, Rechargeable
Battery Charge Time: 120 minutes for a full charge
Continuous Run Time: 2 to 3 hours
Number of Complete Recharges: Up to 1000
Battery Replacment: Factory replaceable

Vacuum:
Minimum of 15 to 20″ of mercury depending on elevation and atmospheric pressure.
Dimensions (Length x Height x Width):
Wand: 178mm x 30mm x 21mm
Stand: 114mm x 51mm x 98mm

Weight:
Porta-Wand: 154 grams
Charger Stand: 298 grams
Transformer: 454 grams

Operating Temperature Range:
10 C to 45 C

Recharger Power Requirements:
Approved power supplies include supplied In-Stand Charger; Universal 110-220V.
Wall plug-in power supply 24 VDC @ 500ma.
Barrel jack size 5.5mm OD x 2.1mm ID.
Center pin positive.

12″ wafer model includes operational vacuum indicator that signals when it is safe to lift the wafer.