Both sides of the 200 m thick conductive polycarbonate base have 30 m thick conductive adhesive.
Total thickness is 260 m.
Same material as the PELCO Image Tabs.

Protection for handling, storage and shipping is provided on one side by the 25 m thick, transparent liner and on the other side by the 40 m thick, white liner.
The conductive adhesive is a carbon filled acrylic adhesive, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol or alcohols.

Temperature maximum is 60 C (140 F).
Small impurities of Cu, Si, Sb, S, Na, P and very small impurities of Fe and Mg can be found.

Refrigeration will increase shelf life but a warm-up time of 1 hour is then required before use.
Sizes are 12mm and 25mm W x 5m L (1/2″ and 1″ x 5.46 yd) with a core diameter of 76mm (3″).
Also available in sheet form: 65 W x 300mm L (2.5″ x 11.8″).

Please observe that 16084-9 carbon conductive tape, 65mm wide, might be applied for particle collection and analysis in clean rooms or other purposes.