Product
Description
Order
Product

45° Cross Section Holder
Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45 angle.
Art.
no. 15460

Description

45 Cross Section Holder

This Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45 angle.
Clip width is 6.35mm.
Accommodates a sample thickness up to 11mm.
The clip provides minimal surface clamping area and grounding on the imaged surface.

Screws used are 4-40 x 3/16 truss head screw, stainless steel and 2-56 x 3/16 pan head, stainless steel.

Order

Product
Description
Order
Product

Triple 45° Cross Section Holder
Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45 angle.
Art.
no. 15461

Description

Triple 45 Cross Section Holder

The Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 45 angle.
Clip width is 6.35mm.
Accommodates three samples with a thickness up to 11mm.
The clips provide minimal surface clamping area and grounding on the imaged surface.

Screws used are 4-40 x 3/16 truss head screw, stainless steel and 2-56 x 3/16 pan head screw, stainless steel.

Order

Product
Description
Order
Product

Triple 70° Cross Section Holder
Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 70 angle.
Art.
no. 15379-2

Description

Triple 70 Cross Section Holder

The Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 70 angle.
Clip width is 6.35mm.
Accommodates three samples with a thickness up to 11mm.
The clips provide minimal surface clamping area and grounding on the imaged surface.

Screws used are 4-40 x 3/16 truss head screw, stainless steel and 2-56 x 3/16 pan head screw, stainless steel.

Order

Product
Description
Order
Product

90° Cross Section Holder
Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90 angle.
Art.
no. 15378-2

Description

90 Cross Section Holder

This Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90 angle.
Clip width is 6.35mm.
Accommodates a sample thickness up to 11mm.
The clip provides minimal surface clamping area and grounding on the imaged surface.

Screws used are 4-40 x 3/16 truss head screw, stainless steel and 2-56 x 3/16 pan head screw, stainless steel.

Order

Product
Description
Order
Product

Triple 90° Cross Section Holder
Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90 angle.
Art.
no. 15380-2

Description

Triple 90 Cross Section Holder

The Triple Cross Section Holder is made of aluminum with spring-loaded brass clamping and grounding clip and holds sample at a 90 angle.
Clip width is 6.35mm.
Accommodates a sample thickness up to 11mm.
The clips provide minimal surface clamping area and grounding on the imaged surface.

Screws used are 4-40 x 3/16 truss head screw, stainless steel and 2-56 x 3/16 pan head screw, stainless steel.

Order

Product
Description
Order
Product

Cross Section Holder
Specimen holder holds thin or flat samples up 6.35mm (1/4″).
Art.
no. 15325-4

Description

Cross Section Holder

This specimen holder holds thin or flat samples up 6.35mm (1/4″). Adjustable angle from 0-180 .
Made of non-magnetic stainless steel.

Overall height is 30mm (1.2″) from the pivot point.
The clamping part is a 16mm (0.62″) cube without thumb screws.

Screw used is 4-40 x 1/2 thumb screw.

Order