Products

Processing

[elementor-template id=”186167″]

Loading…

Product
Description
Order
Product

PELCO HistoWave Cassette System
The PELCO HistoWave Cassette System consists of a Cassette Tank and Cassette Rack.
Art.
no. 36150 to 36150-1

Description

PELCO HistoWave Cassette System Can be used as a stand alone system or in the PELCO TissueVac accessory.

Cassette Rack shown assembled and loaded. Note the two over-sized (white) cassettes being accommodated in the center of the rack.
The PELCO HistoWave Cassette System consists of a Cassette Tank and Cassette Rack. The design provides for ease of loading, unloading and fluid exchange during processing. The system will hold 26 standard-sized plastic cassettes or 22 standard and 2 over-sized cassettes. There is a hole in the handle for the temperature probe. The amount of reagent needed to cover 1 or 26 cassettes is approximately 500ml. It is easiest to add solutions when the system is assembled. The system is made of microwave-compatible and solvent-resistant plastics. Use the optionally available Paraffin Heating Tile, Prod. No. 36150-1, under the Cassette Tank when more heat generation is required in the Microwave Tissue Processor for paraffin embedding. Note: The PELCO HistoWave Cassette System may also be used in the PELCO TissueVac Vacuum Chamber, Prod. No’s 36161 and 36160, which is an accessory for the PELCO BioWave Pro and previous PELCO Microwave Processors.

Cassette Tank	PELCO HistoWave Cassette System loaded and assembled.	Cassette Holder with cassettes may be rested on tank to facilitate draining.	Optional Paraffin Heating Tile
Dimensions of Cassette Holder (with handle): 79.4mm H x 111.2mm squareInside Dimensions of Cassette Tank: 73mm D x 115.1mm square Size of Standard Histology Cassette: Length: 4.06cm Width: 2.86cm Depth: 0.7cm Size of Over-Sized Histology Cassette: Length: 4.30cm Width: 2.86cm Depth: 1.30cm

Order

Product
Description
Order
Product

PELCO Prep-Eze Specimen Holders
Art.
no. 36157 to 36158-3

Description

PELCO Prep-Eze Microwave-use Specimen Holders

The PELCO Prep-Eze Holder accomodates processing 6-12 specimen batches.

The unique design provides simpler handling and reduction in the volume of chemicals needed.
The PELCO Prep-Eze fits with the 36135 Polypropylene Petri Dishes.

The outside dimensions of the holders are: 50.8mm diameter x 19mm High 44.5mm High with handle)
No. 36157-1 has 6 wells, 12.7mm diameter x 17mm deep.
No. 36158-1 has 12 wells, 9.5mm diameter x 17mm deep.

The mesh openings are 420 m.
The small hole can be used to hold the temperature probe for specimen level temperature control.


36157-3	36158-3

Numbered mats, available for both sizes, are plastic laminated to resist chemicals and may be written on with a dry erase marker.
With the holder placed on the mat, easy identification of specific wells is possible.
The kits includes one specimen holder, one ID mat and 20 polypropylene petri dishes (58 x 15mm, Prod. No. 36135) suitable for use in the microwave.

Order

Product
Description
Order
Product

PELCO Microwave Microcentrifuge Tube Holder
Made from PTFE, designed to hold 18 conventional polyethylene microcentrifuge tubes.
Art.
no. 36134

Description

PELCO Microwave Microcentrifuge Tube Holder

Made from PTFE, designed to hold 18 conventional polyethylene microcentrifuge tubes.
Firmly holds tubes in water bath or on PELCO ColdSpot Pro during processing.

Order

Product
Description
Order
Product

Microwave Capsule Holder with Lid
The improved PELCO Microwave Capsule Holder has three design features that set it apart from the previous design.
Art.
no. 36131-2

Description

PELCO Microwave Capsule Holder with Lid

The improved PELCO Microwave Capsule Holder has three design features that set it apart from the previous design.

“Stops” on the legs to keep the capsule base level during loading
A hole with a stop in the base to allow the 00 embedding capsule to be set in place easily
The new capture top that has a recess to keep the embedding capsule lid in place throughout the polymerization process in the microwave

Order

Product
Description
Order
Product

Polypropylene Petri Dishes
Polypropylene Petri Dishes are microwave transparent and sturdy.
Art.
no. 36135 and 36135-5

Description

Polypropylene Petri Dishes

Polypropylene Petri Dishes are microwave transparent and sturdy.
These dishes can be coupled with the PELCO Prep-Eze holders for microwave processing.

Bottom inside dimensions: 50mm dia. x 12mm deep
Lid inside dimensions: 56mm dia. x 10mm deep

Order

Product
Description
Order
Product

Microwave Polymerization System
Designed for resin polymerization using the 36131 or 36131-2 Capsule Holders in the PELCO BioWave Microwave Tissue Processor, Includes Tray, Insulator Pad and Lid
Art.
no. 36133 and 36133-10

Description

Microwave Resin Polymerization System Designed for resin polymerization using the 36131 or 36131-2 Capsule Holders in the PELCO BioWave Microwave Tissue Processor During microwave-assisted resin polymerization the microwave polymerization system is placed on the Microwave Polymerization Stand on the PELCO ColdSpot Pro. The tray is filled with water to cover the 36131 or 36131-2 capsule holders. The insulator pad is placed on the surface of the water and the lid placed on the tray. There are two holes in the lid so that the temperature probe can be inserted on either side to monitor heating rates. This new system controls the rate of heating and the temperature maximum (100 C) without the loss of water during the polymerization process. Microwave wattage will control the heating rate which ensures a quality polymerization each run.

	Microwave Polymerization Stand (36133-20)
Microwave Polymerization System shown with the Polymerization Stand (36133-20) and PELCO Microwave Capsule Holder (36131-2) on the PELCO ColdSpot Pro (36116-10)

Order

Product
Description
Order
Product

Corning Costar Tissue Culture Plates
Tissue Culture-treated Plates are designed for a wide range of applications
Art.
no. 36168-6 to 36168-24

Description

Corning Costar Tissue Culture Plates

Tissue Culture-treated Plates are designed for a wide range of applications including general cell growth experiments, cloning studies, virus isolation and in vitro testing.

Plate bottoms have a uniform thickness, allowing for distortion-free observation. Alphanumeric coordinates are placed on the same focal plane as cell growth, for convenient referencing of cell position. Gripping edges make handling easier.

All plates have non-reversible covers with condensation rings to minimize evaporation and the risk of contamination.

Plates are made of optically clear, medical-grade non-pyrogenic polystyrene, TC-treated, sterile and are used for processing of tissue on the bench or in the microwave. The corresponding Wellplate Inserts are No. 36168 for the 6 cavity, No. 36170 for the 12 cavity, and No. 36172 for the 24 cavity.

Ordering Information

	No. of Wells	Well Dia.	Well Growth Area	Total Well Volume	Working Volume
36168-6	6	35mm	9.5cm²	15ml	2-3ml
36170-12	12	22.6mm	3.8cm²	7ml	1ml
36172-24	24	16mm	1.9cm²	3.4ml	0.5ml

Order

Product
Description
Order
Product

Amplate Roller
Roller made of medium hard rubber secured in a heavy duty handle.
Art.
no. 36167

Description

Amplate Roller

Manufactured with a comfort grip to assist in creating a perfect seal when used with SecureSeal Sealing Film.

Order

Product
Description
Order
Product

8-Section Staining Nets
Available with netting of 32 mesh or 64 mesh
Art.
no. 36154-32 and 36154-64

Description

8-Section Staining Nets

Dimensions: 89 x 38mm.

Available with netting of 32 mesh or 64 mesh

Rod in center of net can be grasped to lift net from Staining Dish.

Order

Product
Description
Order
Product

Pyrex Staining Dish
For use with Staining Nets.
Art.
no. 36754-60

Description

Pyrex Staining Dish

100mm diameter x 50mm H, for use with above Staining Nets.

Order